Dear Sir/Madam,I am not able to generate response for R-L circuit using electrical components-R,L, Ground, Power supply, cscope and clock.Basically, final integration time in set up is not getting set to 30 as per the cscope parameters.Though the circuit does not show any error but the graph is not generated as it should be.However, using transfer function and step input, I am able to generate but I want using R and L components.Pl help
I have one simulation model and still did not figure it out what is the error as error message is not showing up. Thank youThe error is that my simulation work only for 0 second which is error but I dont how to overcome it. I will pay 400INR for it if someone solve the error and explain me like tutions. Thank you "[verboseMessage] time = 0] {} Kalman_Filter_SIM: Calling with flag Ending(5)" "End of simulation for Kalman Filter block." "[verboseMessage] time = 0] {} System_SIM: Calling with flag Ending(5)"</span>
What are the steps that need to be followed to create a csv file?
how I find xcos in 6.1.0 version of scilab
for energy simulations how to assign xcos palettes
In Palette browser, I can not see the 'Commonly used blocks' option. I am using Scilab 6.1.0 on Ubuntu.
I cannot see the title and border of the graph. I am using Scilab 6.1.0 on Ubuntu 18.04.
I am using Scilab 6.1.0 on Ubuntu 18.04. I am not able to find the transfer function block in Continuous time system palette.
cscope: Scilab is compiled without GUI, can not !!use !! !!Scope. please provide answer for my question
we need more tutorial on xcos. basically i am computer science, so kindly do the needful
Hi ThereWhen I try to simulate electrical circuits using Xcos, following message apperas, although it runs mathematical modules:Main Modelica : C:\\Users\\nrahate\\AppData\\Local\\Temp\\SCI_TMP_14588_18094\\Switched_capacitor_integrator_im.mo Flat Modelica : C:\\Users\\nrahate\\AppData\\Local\\Temp\\SCI_TMP_14588_18094\\Switched_capacitor_integrator_imf.mo Simulation C code :C:\\Users\\nrahate\\AppData\\Local\\Temp\\SCI_TMP_14588_18094\\Switched_capacitor_integrator_im.c Generate a loader file Generate a Makefile Running the Makefile Compilation of Switched_capacitor_integrator_im.c Building shared library (be patient) '"C:\\Program Files (x86)\\Microsoft Visual Studio 14.0\\VC\\vcvarsall.bat"' is not recognized as an internal or external command, operable program or batch file.!'"C:\\Program Files (x86)\\Microsoft Visual Studio 14.0\\VC\\vcvarsall.bat"' is not recogni!!zed as an internal or external command, !! !!operable program or batch file. !! !!'nmake' is not recognized as an internal or external command, !! !!operable program or batch file. !!sorry compiling problem !! !!ilib_compile: Error while executing Makelib.mak. ! c_pass1: build the modelica meta-block failed xcos_simulate: Error during block parameters update.
hello, i am encountering problem using xcos application in scilab. whenever i try to change the default values of a block, the application stops working. can anybody tell me way to resolve this issue?i am using scilab 6.1.0 (64-bit) on windows8. thanks
How to resolve the following: Modelica blocks are reduced to a block with:\r\n \r\n \r\n Number of differential states: 0\r\n \r\n \r\n Number of algebraic states: 3\r\n \r\n \r\n Number of discrete time states : 0\r\n \r\n \r\n Number of zero-crossing surfaces: 2\r\n \r\n \r\n Number of modes : 2\r\n \r\n \r\n Number of inputs : 0\r\n \r\n \r\n Number of outputs: 3\r\n \r\n \r\n Input/output dependency:[T]\r\n \r\n \r\n Analytical Jacobian: enabled (%Jacobian=%t)\r\n \r\n \r\n Parameter embedding mode: enabled (%Modelica_ParEmb=%t)
As the descriptions are not available regarding the options available in palette, it is difficult to solve the assignment. And the physics of the question has to be understood before solving it.
what are palettes? what is its application?Also, how to understand about all the options available in palettes. (for eg - what is CLR : in continuous time systems)
I m not getting which block should be taken as second order transfer function block
\r\n \r\n I am getting the following error in scilab 5.5.2 XcosDefaultTeXFont.xml: error reading font 'fonts/latin/jlm_cmr10.ttf'. Error \r\n message: Problem reading font data.\r\n \r\n\r\n
Selected tools are not available.
Not opening. got the error 999
We can not define the scope parameters as per your data. i am using 5.2.2 is this real problem.
Dear Sir,Please find the attachment of screenshots which elaborates the error received during execution of DEMO in Scilab>Demonstration>Xcos>Electrical System> Please help us in solving this problem ...
I am using Scilab 5.5.2I tried to open xcos as was mentioned in tutorial but I get this errorxcos: 28);if with_module("xcos") then xcos(); else disp(gettext("Please install xc !--error 999 xcos: while executing a callback ThanksParvesh Taneja
663 visits
Outline:Xcos ನ ಪರಿಚಯ XCOS ಎಂದರೇನು? ಪ್ಯಾಲೆಟ್ ಎಂದರೇನು? ಪ್ಯಾಲೆಟ್ ನಿಂದ ಬ್ಲಾಕ್ ಗಳನ್ನು ಸಂಗ್ರಹಿಸುವುದು ಮತ್ತು ಬ್ಲಾಕ್ ಡಯಾಗ್ರಾಮ್ ಅನ್ನು ರಚಿಸಲು ಅವುಗಳನ್ನು ಜೋಡಿಸುವುದು ವಿವಿಧ ಬ್ಲಾಕ್ ಗಳ ಪ್ಯಾರಾಮೀಟರ್ ಗಳನ್ನು ಹೊಂದಿಸುವುದು ಸಿಮ್ಯುಲೇಷನ್ ಪ್ಯಾರಾಮೀಟರ್ ಗಳನ್ನು ಹೊಂದಿಸುವುದು ರಚಿಸಿದ ಬ್ಲಾಕ್ ಡಯಾಗ್ರಾಮ್ ಅನ್ನು ಸಿಮ್ಯುಲೇಟ್ ಮಾಡುವುದು
Xcos ನ ಪರಿಚಯ XCOS ಎಂದರೇನು? ಪ್ಯಾಲೆಟ್ ಎಂದರೇನು? ಪ್ಯಾಲೆಟ್ ನಿಂದ ಬ್ಲಾಕ್ ಗಳನ್ನು ಸಂಗ್ರಹಿಸುವುದು ಮತ್ತು ಬ್ಲಾಕ್ ಡಯಾಗ್ರಾಮ್ ಅನ್ನು ರಚಿಸಲು ಅವುಗಳನ್ನು ಜೋಡಿಸುವುದು ವಿವಿಧ ಬ್ಲಾಕ್ ಗಳ ಪ್ಯಾರಾಮೀಟರ್ ಗಳನ್ನು ಹೊಂದಿಸುವುದು ಸಿಮ್ಯುಲೇಷನ್ ಪ್ಯಾರಾಮೀಟರ್ ಗಳನ್ನು ಹೊಂದಿಸುವುದು ರಚಿಸಿದ ಬ್ಲಾಕ್ ಡಯಾಗ್ರಾಮ್ ಅನ್ನು ಸಿಮ್ಯುಲೇಟ್ ಮಾಡುವುದು
Show video info
Pre-requisite