Invitation to Attend “Connect, Simulate and Innovate using Arduino on Cloud”, an awareness programme
If you are not an organiser or invigilator of the Subscribed college, please register using this Google form
I wish to parameterize the internal component for example a current source in my sub-circuit, so that whenever I invoke this sub-circuit I would be able to specify the value of the current source as per the need. Thanks in advance!
https://drive.google.com/file/d/1ryIzlfDukCuVXLhjp9hhoUqIEbO53Vw0/view?usp=sharing
while working out in subcircuit model esim closes automatically
3690 visits
Outline:1. Introduction to Subcircuit Builder. 2. Creating a subcrcuit of Half Adder in eeschema. 3. Connecting Ports. 4. Generating KiCad netlist for the subcircuit. 5. Generating Ngspice netlist for the subcircuit. 6. Introduction to Library Editor and Part Library Editor. 7. Creating a Part Library/symbol for the subcircuit. 8. Adding Pins to the component symbol. 9. Verifying the component in the KiCad library. 10. Simulating the subcircuit using HA_Test example
1. Introduction to Subcircuit Builder. 2. Creating a subcrcuit of Half Adder in eeschema. 3. Connecting Ports. 4. Generating KiCad netlist for the subcircuit. 5. Generating Ngspice netlist for the subcircuit. 6. Introduction to Library Editor and Part Library Editor. 7. Creating a Part Library/symbol for the subcircuit. 8. Adding Pins to the component symbol. 9. Verifying the component in the KiCad library. 10. Simulating the subcircuit using HA_Test example
Show video info
Pre-requisite